View 74V2G132_1090244.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74V2G132
DUAL 2-INPUT SHMITT TRIGGER NAND GATE
PRELIMINARY DATA
s s
s
s
s
s
s
s
HIGH SPEED: tPD = 3.0ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC = 1A(MAX.) at TA=25C TYPICAL HYSTERESIS: VH = 800mV at VCC = 4.5V VH = 500mV at VCC = 3.0V POWER DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 8mA (MIN) at VCC = 4.5V IIOH| = IOL = 4mA (MIN) at VCC = 3.0V BALANCED PROPAGATION DELAYS: tPLH tPHL OPERATING VOLTAGE RANGE: VCC(OPR) = 2V to 5.5V IMPROVED LATCH-UP IMMUNITY
SOT23-8L
SOT323-8L
ORDER CODES
PACKAGE SOT23-8L SOT323-8L T&R 74V2G132STR 74V2G132CTR
DESCRIPTION The 74V2G132 is an advanced high-speed CMOS SINGLE 2-INPUT NAND GATE fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS tecnology. Pin configuration and function are the same as those of the 74V2G00 but the 74V2G132 has hysteresis.
The internal circuit is composed of 3 stages including buffer output, which provide high noise immunity and stable output. Power down protection is provided on all inputs and 0 to 7V can be accepted on inputs with no regard to the supply voltage. This device can be used to interface 5V to 3V.
PIN CONNECTION AND IEC LOGIC SYMBOLS
November 2001
1/9
This is preliminary information on a new product now in development are or undergoing evaluation. Details subject to change without notice.
74V2G132
INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
PIN No 1, 5 2, 6 7, 3 4 8 SYMBOL 1A, 2A 1B, 2B 1Y, 2Y GND VCC NAME QND FUNCTION Data Input Data Input Data Output Ground (0V) Positive Supply Voltage
TRUTH TABLE
A L L H H B L H L H Y H H H L
ABSOLUTE MAXIMUM RATINGS
Symbol VCC VI VO VO IIK IOK IO Supply Voltage DC Input Voltage DC Output Voltage (see note 1) DC Output Voltage (see note 2) DC Input Diode Current DC Output Diode Current DC Output Current Parameter Value -0.5 to +7.0 -0.5 to +7.0 -0.5 to +7.0 -0.5 to VCC + 0.5 - 20 - 20 25 50 -65 to +150 260 Unit V V V V mA mA mA mA C C
ICC or IGND DC VCC or Ground Current Tstg Storage Temperature TL Lead Temperature (10 sec)
Absolute Maximum Rating are those value beyond which damage to the device may occour. Functional operation under these condition is not implied
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VI VO VO Top Supply Voltage Input Voltage Output Voltage Output Voltage Operating Temperature Parameter Value 2 to 5.5 0 to 5.5 0 to 5.5 0 to VCC -55 to 125 Unit V V V V C
2/9
74V2G132
DC SPECIFICATION
Test Condition Symbol Parameter VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 2.0 3.0 4.5 3.0 4.5 VOL Low Level Output Voltage 2.0 3.0 4.5 3.0 4.5 II ICC IOPD Input Leakage Current Quiescent Supply Current Power down Output Leakage Current 0 to 5.5 5.5 0 IO=-50 A IO=-50 A IO=-50 A IO=-4 mA IO=-8 mA IO=50 A IO=50 A IO=50 A IO=4 mA IO=8 mA VI = 5.5V or GND VI = VCC or GND VO = 5.5 TA = 25C Min. Typ. Max. 2.20 3.15 3.85 0.90 1.35 1.65 0.30 0.40 0.50 1.9 2.9 4.4 2.58 3.94 0.0 0.0 0.0 0.1 0.1 0.1 0.36 0.36 0.1 1 0.5 0.90 1.35 1.65 0.30 0.40 0.50 1.9 2.9 4.4 2.48 3.8 0.1 0.1 0.1 0.44 0.44 1 10 5 Value -40 to 85C Min. Max. 2.20 3.15 3.85 0.90 1.35 1.65 0.30 0.40 0.50 1.9 2.9 4.4 2.4 3.7 0.1 0.1 0.1 0.55 0.55 1 20 10 A A A V V -55 to 125C Min. Max. 2.20 3.15 3.85 V Unit
VP
High Level Input Voltage Low Level Input Voltage Hysteresis Voltage
VN
V
VH
0..5 0.8 1.0 2.0 3.0 4.5
1.20 1.40 1.60
1.20 1.40 1.60
1.20 1.40 1.60
V
VOH
High Level Ouput Voltage
AC ELECTRICAL CHARACTERISTICS (Input tr = tf = 3ns)
Test Condition Symbol Parameter VCC (V) 3.3(*) 3.3(*) 5.0(**) 5.0(**)
(*) Voltage range is 3.3V 0.3V (**) Voltage range is 5.0V 0.5V
Value TA = 25C Min. Typ. 5.5 8.0 3.7 5.2 Max. 7.9 11.4 5.5 7.5 -40 to 85C Min. 1.0 1.0 1.0 1.0 Max. 9.5 13.0 6.5 8.5 -55 to 125C Min. 1.0 1.0 1.0 1.0 Max. 9.5 13.0 6.5 8.5 ns Unit
CL (pF) 15 50 15 50
tPLH tPHL Propagation Delay Time
3/9
74V2G132
CAPACITANCE CHARACTERISTICS
Test Condition Symbol Parameter Min. CIN CPD Input Capacitance Power Dissipation Capacitance (note 1) TA = 25C Typ. 4 19 Max. 10 Value -40 to 85C Min. Max. 10 -55 to 125C Min. Max. 10 pF pF Unit
1) CPD is defined as the value of the IC's internal equivqlent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average current cqn be obtqined by the following equation. ICC(opr) = CPD x VCC x fIN + ICC
TEST CIRCUIT
CL = 50pF or equivalent (includes jig and probe capacitance) RL = R1 = 500 or equivalent RT = ZOUT of pulse generator (typically 50)
WAVEFORM: PROPAGATION DELAY (f=1MHz; 50% duty cycle)
4/9
74V2G132
SOT23-8L MECHANICAL DATA
mm. DIM. MIN. A A1 A2 b C D E E1 e e1 L 0.35 0.90 0.00 0.90 0.22 0.09 2.80 2.60 1.50 0 .65 1.95 0.55 13.7 TYP MAX. 1.45 0.15 1.30 0.38 0.20 3.00 3.00 1.75 MIN. 35.4 0.0 35.4 8.6 3.5 110.2 102.3 59.0 25.6 76.7 21.6 TYP. MAX. 57.1 5.9 51.2 14.9 7.8 118.1 118.1 68.8 mils
5/9
74V2G132
SOT323-8L MECHANICAL DATA
mm. DIM. MIN. A A1 A2 b C D E E1 e e1 L 0.10 0.80 0.00 0.80 0.13 0.10 1.80 1.80 1.15 0.5 1.5 0.30 3.9 TYP MAX. 1.10 0.10 1.00 0.28 0.18 2.20 2.40 1.35 MIN. 31.5 0.0 31.5 5.1 3.9 70.9 70.9 45.3 19.7 59.0 11.8 TYP. MAX. 43.3 3.9 34.9 11.0 7.1 86.6 94.5 53.1 mils
6/9
74V2G132
Tape & Reel SOT23-xL MECHANICAL DATA
mm. DIM. MIN. A C D N T Ao Bo Ko Po P 3.13 3.07 1.27 3.9 3.9 3.23 3.17 1.37 4.0 4.0 12.8 20.2 60 14.4 3.33 3.27 1.47 4.1 4.1 0.123 0.120 0.050 0.153 0.153 0.127 0.124 0.054 0.157 0.157 13.0 TYP MAX. 180 13.2 0.504 0.795 2.362 0.567 0.131 0.128 0.0.58 0.161 0.161 0.512 MIN. TYP. MAX. 7.086 0.519 inch
7/9
74V2G132
Tape & Reel SOT323-xL MECHANICAL DATA
mm. DIM. MIN. A C D N T Ao Bo Ko Po P 3.98 3.98 2.25 2.7 1.2 4 4 4.2 4.2 0.156 0.156 175 12.8 20.2 59.5 60 60.5 14.4 0.088 0.106 0.047 0.157 0.157 0.165 0.165 TYP 180 13 MAX. 185 13.2 MIN. 6.889 0.504 0.795 2.362 0.567 TYP. 7.086 0.512 MAX. 7.283 0.519 inch
8/9
74V2G132
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. (c) http://www.st.com
9/9

▲Up To Search▲

Price & Availability of 74V2G132

	To Download 74V2G132 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .